Public Course Registration

April 20 - April 20

- Working at Heights Training, Orillia (April 20)

Working at Heights Training, Orillia (April 20). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 am - 4:30 pm:
Cost: $140.00/person plus HST; includes all training materials:
Location:
Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Theory Agenda

  • Rights and responsibilities related to working at heights under the Occupational Health
    and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


April 25 - April 25

- Working at Heights Training, Barrie (April 25)

Working at Heights Training, Barrie (April 25). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training
requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 am - 4:30 pm:
Cost: $140.00/person plus HST; includes all training materials:
Location:

The Creative Space

12 Dunlop St. E.

Barrie, ON

L4M 1A3

Theory Agenda:

  • Rights and responsibilities related to working at heights under the Occupational Health and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda:

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


April 26 - April 26

- Working at Heights Training, Orillia (April 26)

Working at Heights Training, Orillia (April 26). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 AM - 4:30 PM:
Cost: $140.00/person plus HST; includes all training materials:
Location:

14 Matchedash Street North

Orillia, ON

L3V 4T5

Theory Agenda

  • Rights and responsibilities related to working at heights under the Occupational Health
    and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


May 4 - May 4

- Working at Heights Training, Barrie (May 4)

Working at Heights Training, Barrie (May 4). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 AM - 4:30 PM:
Cost: $140.00/person plus HST; includes all training materials:
Location:

The Creative Space

12 Dunlop St. E.

Barrie, ON

L4M 1A3

Theory Agenda:

  • Rights and responsibilities related to working at heights under the Occupational Health and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda:

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


May 7 - May 9

- Part One Basic Certification Training (JHSC), Orillia (May 7-9)

Part One Basic Certification  Training (JHSC), Orillia (May 7-9). MOL New Standards. Recognized Provider by the Ministry of Labour. CBHM has been providing Expert consultation and training since 1997. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

  • Consider registering now for your Part Two Certification. Part Two must be completed within six months of Part One completion.
Type: Part One Basic Certification (3-day program):
Time: 8:00 AM - 4:30 PM:
Cost: $499.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

NEW MOL STANDARDS IN EFFECT AS OF MARCH 1, 2016. 

Canadian Business Health Management Inc. has been providing quality health and safety training to thousands of participants since 1997.

CBHM is a recognized provider by the Ministry of Labour (MOL) for Part One Basic Certification training and Part Two Certification (Workplace Specific Hazards Training) which focuses on a variety of topics including health and safety law, Rights Duties and Responsibilities of Workplace Parties, RACE (Hazard Recognition, Assessment, Control, Controls Evaluation) and investigation techniques.

The Part One Basic Certification (Joint Health and Safety Certification) course is taught by seasoned experts who have extensive industry and managerial experiences from a variety of industry sectors. Participants receive all of the mandatory requirements for certification and come away with the knowledge and skill sets to successfully handle their new responsibilities.

Program Topics:

  • Occupational Health and Safety Law
  • Rights, Duties and Responsibilities of the Workplace Parties
  • Hazard Recognition, Assessment and Control; Evaluation of Hazard Controls
  • Joint Health and Safety Committees
  • Duties and Responsibilities of JHSC Members and Certified Members
  • Health and Safety Resources
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


May 10 - May 10

- Working at Heights Training, Orillia (May 10)

Working at Heights Training, Orillia (May 10) . Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 AM - 4:30 PM:
Cost: $140.00/person plus HST; includes all training materials:
Location:

14 Matchedash Street North

Orillia, ON

L3V 4T5

Theory Agenda:

  • Rights and responsibilities related to working at heights under the Occupational Health and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda:

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


May 15 - May 15

- Working at Heights Refresher Training, Orillia (May 15 – Afternoon Session)

Working at Heights Refresher Training, Orillia (May 15 – Afternoon Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 1:00 PM - 5:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


May 15 - May 15

- Working at Heights Refresher Training, Orillia (May 15 – Morning Session)

Working at Heights Refresher Training, Orillia (May 15 – Morning Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 8:00 AM - 12:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


May 23 - May 23

- Working at Heights Training, Orillia (May 23)

Working at Heights Training, Orillia (May 23). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 AM - 4:30 PM:
Cost: $140.00/person plus HST; includes all training materials:
Location:

14 Matchedash Street North
Orillia, ON
L3V 4T5

Theory Agenda:

  • Rights and responsibilities related to working at heights under the Occupational Health and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda:

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


May 24 - May 25

- Standard First Aid Training with CPR (Level C), Orillia (May 24-25)

Standard First Aid Training with CPR (Level C), Orillia (May 24-25) . Recognized provider by WSIB. This program has been developed by CBHM and is taught by Health Care Professionals/Emergency First Responders. CBHM has been providing quality training since 1997 to make a difference. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

**New ILCOR Guidelines** Program updated September 2011 – “All For Safety – Handling Emergency Situations” continues to set the standard. Taught by dynamic Health Care Professionals/Emergency First Responders.

Type: Standard First Aid Certification (2-day program):
Level C: Adult, Child, Infant CPR:
Time: 8:30 AM - 4:30 PM:
Cost: $125.00/person plus HST; includes all training materials:
Location:

50 Andrew St S #102
Orillia, ON
L3V 7T5

ALL FOR SAFETY™ – Handling Emergency Situations

Standard First Aid (Ontario) Outline

  • Legal Responsibilities (understanding consent, implied consent, abandonment)
  • Safeguarding Your Health; Communicable Diseases
  • Personal Protective Equipment; Glove Removal; Decontamination Protocols
  • Scene Survey; Primary Survey; Secondary Survey; Ongoing Casualty Care

SFA Core Content – signs, symptoms & treatment for:

  • Emergency Scene Management (ESM)
  • Shock, Unconsciousness, Fainting
  • Choking (mild and severe airway obstruction adult/child, special circumstances)
  • Severe Bleeding (internal & external); Wound Care; Burns
  • Cardiovascular Emergencies
  • One and Two Rescuer CPR/AED
  • Medical Conditions – Diabetes, Seizures, Allergic Reactions, Asthma

SFA Elective Modules (minimum of eight modules)

  • Bone Muscle and Joint Injuries
  • Head and Spinal Injuries
  • Pelvic, Abdominal and Crush Injuries
  • Environmental Illnesses, Medical Conditions and Injuries
  • Multiple Injury Management
  • Child Resuscitation (choking, CPR/AED)
  • Infant Resuscitation (choking, CPR)
  • Secondary Survey
  • Rescue Carries

Upon Completion of the Program

  • Participants/Companies receive certificates
  • Record of training
Please Note:

Program is subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.


May 24 - May 24

- Emergency First Aid Training and CPR Training (Level B), Orillia (May 24)

Emergency First Aid and CPR Training (Level B), Orillia (May 24). Recognized provider by WSIB. This program has been developed by CBHM and is taught by Health Care Professionals/Emergency First Responders. CBHM has been providing quality training since 1997 to make a difference. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

**New ILCOR Guidelines** Program updated September 2011 – “All For Safety – Handling Emergency Situations” continues to set the standard. Taught by dynamic Health Care Professionals/Emergency First Responders.

Type: Emergency First Aid Certification (1-day):
Level B: Adult/Child CPR:
Time: 8:30 AM - 4:30 PM:
Cost: $75.00/person plus HST; includes all training materials:
Location:

50 Andrew St S #102
Orillia, ON
L3V 7T5

ALL FOR SAFETY™ – Handling Emergency Situations

Emergency First Aid (Ontario) Outline

  • Legal Responsibilities (understanding consent, implied consent, abandonment)
  • Safeguarding Your Health; Communicable Diseases
  • Personal Protective Equipment; Glove Removal; Decontamination Protocols
  • Scene Survey; Primary Survey; Secondary Survey; Ongoing Casualty Care

EFA Core Content – Signs, symptoms & treatment for:

  • Emergency Scene Management (ESM)
  • Shock, Unconsciousness, Fainting
  • Choking (mild and severe airway obstruction adult/child, special circumstances)
  • Severe Bleeding (internal & external); Wound Care; Burns
  • Cardiovascular Emergencies
  • One and Two Rescuer CPR/AED
  • Medical Conditions – Diabetes, Seizures, Allergic Reactions, Asthma
Please Note:

Program is subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.


May 28 - May 29

- Part Two Certification Training, Orillia (May 28-29)

Part Two Certification Training (Workplace Specific Hazards), Orillia (May 28-29). MOL New Standards. Canadian Business Health Management Inc. is a Recognized Provider by the Ministry of Labour. All programs are taught by industry experts. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Part Two Certification Now. Part Two must be completed within six months of Part One completion. If more than six months have passed, participants must either take a JHSC Refresher course before taking Part Two OR apply to the MOL for an extension.

Type: Part Two Certification (Workplace Specific Hazards) Training:
Time: 8:00 AM - 4:30 PM:
Cost: $399.00/person plus HST; includes all training materials:
Location:

50 Andrew St S #102
Orillia, ON
L3V 7T5

Day 1 Modules

Part One Review (RACE) and The Provincial Hazard Priorities, Violence and Harassment, Housekeeping (slips, trips, falls), Manual Material Handling, Ergonomics.

Day 2 Modules*

Emergency Preparedness, Indoor Air Quality, Noise, Flammables/Combustibles, Equipment/Machinery Hazards, Personal Protective Equipment.

*Day 2 Modules subject to change based on attending company requirements (please contact our office for more information).

** Day 3 – please note, at this time CBHM has developed 20 specific hazard modules that reflect the requirements for many sectors. When contacting our office to schedule your Part Two, please identify your workplace specific hazards in order for us to schedule your training dates accordingly.

Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


May 30 - May 30

- Working at Heights Training, Barrie (May 30)

Working at Heights Training, Barrie (May 30). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Working at Heights training now. MOL approved training provider. This training requirement is in addition to existing training requirements* for workers who use fall protection systems on construction projects, as set out in the Construction Projects Regulation (O. Reg. 213/91).

Type: Working at Heights:
Time: 8:00 am - 4:30 pm:
Cost: $140.00/person plus HST; includes all training materials:
Location:

The Creative Space

12 Dunlop St. E.

Barrie, ON

L4M 1A3

Theory Agenda

  • Rights and responsibilities related to working at heights under the Occupational Health
    and Safety Act
  • Identification of the Hazards
  • Eliminating or Controlling the Hazards
  • Warning Methods and Physical Barriers
  • Ladders and Similar Equipment
  • Personal Fall Protection Equipment

Practical Agenda

  • Barriers and Other Fixed Equipment
  • Personal Fall Protection Equipment
  • Anchor points
  • Work Positioning, Access Equipment and Platforms
  • Rescue planning
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


June 13 - June 15

- Part One Basic Certification Training (JHSC), Barrie (June 13-15)

Part One Basic Certification  Training (JHSC), Barrie (June 13-15). MOL New Standards. Recognized Provider by the Ministry of Labour. CBHM has been providing Expert consultation and training since 1997. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

  • Consider registering now for your Part Two Certification. Part Two must be completed within six months of Part One completion.
Type: Part One Basic Certification (3-day program):
Time: 8:00 AM - 4:30 PM:
Cost: $499.00/person plus HST; includes all training materials:
Location:

12 Dunlop St E.
Barrie, ON
L4M 1A3

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

NEW MOL STANDARDS In EFFECT AS OF MARCH 1, 2016. 

Canadian Business Health Management Inc. has been providing quality health and safety training to thousands of participants since 1997.

CBHM is a recognized provider by the Ministry of Labour (MOL) for Part One Basic Certification training and Part Two Certification (Workplace Specific Hazards Training) which focuses on a variety of topics including health and safety law, Rights Duties and Responsibilities of Workplace Parties, RACE (Hazard Recognition, Assessment, Control, Controls Evaluation) and investigation techniques.

The Part One Basic Certification (Joint Health and Safety Certification) course is taught by seasoned experts who have extensive industry and managerial experiences from a variety of industry sectors. Participants receive all of the mandatory requirements for certification and come away with the knowledge and skill sets to successfully handle their new responsibilities.

Program Topics:

  • Occupational Health and Safety Law
  • Rights, Duties and Responsibilities of the Workplace Parties;
  • Hazard Recognition, Assessment and Control; Evaluation of Hazard Controls;
  • Joint Health and Safety Committees;
  • Duties and Responsibilities of JHSC Members and Certified Members; and
  • Health and Safety Resources.
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.


June 19 - June 19

- Working at Heights Refresher Training, Barrie (June 19 – Afternoon Session)

Working at Heights Refresher Training, Barrie (June 19 – Afternoon Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 1:00 PM - 5:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

The Creative Space
12 Dunlop St E.
Barrie, ON
L4M 1A3

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


June 19 - June 19

- Working at Heights Refresher Training, Barrie (June 19 – Morning Session)

Working at Heights Refresher Training, Barrie (June 19 – Morning Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 8:00 AM - 12:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

The Creative Space
12 Dunlop St E.
Barrie, ON
L4M 1A3

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


July 11 - July 13

- Part One Basic Certification Training (JHSC), Orillia (July 11-13)

Part One Basic Certification  Training (JHSC), Orillia (July 11-13) . MOL New Standards. Recognized Provider by the Ministry of Labour. CBHM has been providing Expert consultation and training since 1997. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

  • Consider registering now for your Part Two Certification. Part Two must be completed within six months of Part One completion.
Type: Part One Basic Certification (3-day program):
Time: 8:00 AM - 4:30 PM:
Cost: $499.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

NEW MOL STANDARDS IN EFFECT AS OF MARCH 1, 2016. 

Canadian Business Health Management Inc. has been providing quality health and safety training to thousands of participants since 1997.

CBHM is a recognized provider by the Ministry of Labour (MOL) for Part One Basic Certification training and Part Two Certification (Workplace Specific Hazards Training) which focuses on a variety of topics including health and safety law, Rights Duties and Responsibilities of Workplace Parties, RACE (Hazard Recognition, Assessment, Control, Controls Evaluation) and investigation techniques.

The Part One Basic Certification (Joint Health and Safety Certification) course is taught by seasoned experts who have extensive industry and managerial experiences from a variety of industry sectors. Participants receive all of the mandatory requirements for certification and come away with the knowledge and skill sets to successfully handle their new responsibilities.

Program Topics:

  • Occupational Health and Safety Law
  • Rights, Duties and Responsibilities of the Workplace Parties
  • Hazard Recognition, Assessment and Control; Evaluation of Hazard Controls
  • Joint Health and Safety Committees
  • Duties and Responsibilities of JHSC Members and Certified Members
  • Health and Safety Resources
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


July 19 - July 19

- Working at Heights Refresher Training, Orillia (July 19 – Morning Session)

Working at Heights Refresher Training, Orillia (July 19 – Morning Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 8:00 AM - 12:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


July 19 - July 19

- Working at Heights Refresher Training, Orillia (July 19 – Afternoon Session)

Working at Heights Refresher Training, Orillia (July 19 – Afternoon Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 1:00 PM - 5:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


July 23 - July 24

- Part Two Certification Training, Orillia (July 23-24)

Part Two Certification Training (Workplace Specific Hazards), Orillia (July 23-24). MOL New Standards. Canadian Business Health Management Inc. is a Recognized Provider by the Ministry of Labour. All programs are taught by industry experts. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Part Two Certification now. Part Two must be completed within six months of Part One completion. If more than six months have passed, participants must either take a JHSC Refresher course before taking Part Two OR apply to the MOL for an extension.

Type: Part Two Certification (Workplace Specific Hazards) Training:
Time: 8:00 AM - 4:30 PM:
Cost: $399.00/person plus HST; includes all training materials:
Location:

Highway Man Inn
201 Woodside Drive
Orillia, ON
L3V 6T4

Day 1 Modules

Part One Review (RACE) and The Provincial Hazard Priorities, Violence and Harassment, Housekeeping (slips, trips, falls), Manual Material Handling, Ergonomics.

Day 2 Modules*

Emergency Preparedness, Indoor Air Quality, Noise, Flammables/Combustibles, Equipment/Machinery Hazards, Personal Protective Equipment.

*Day 2 Modules subject to change based on attending company requirements (please contact our office for more information).

** Day 3 – please note, at this time CBHM has developed 20 specific hazard modules that reflect the requirements for many sectors. When contacting our office to schedule your Part Two, please identify your workplace specific hazards in order for us to schedule your training dates accordingly.

Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


August 8 - August 10

- Part One Basic Certification Training (JHSC), Barrie (August 8-10)

Part One Basic Certification  Training (JHSC), Barrie (August 8-10). MOL New Standards. Recognized Provider by the Ministry of Labour. CBHM has been providing Expert consultation and training since 1997. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

  • Consider registering now for your Part Two Certification. Part Two must be completed within six months of Part One completion.
Type: Part One Basic Certification (3-day program):
Time: 8:00 AM - 4:30 PM:
Cost: $499.00/person plus HST; includes all training materials:
Location:

12 Dunlop St E.

Barrie, ON

L4M 1A3

CBHM’s Part One Basic Certification program (All For Safety™) is an approved provider by the Ministry of Labour. This is a 3-day program.

NEW MOL STANDARDS IN EFFECT AS OF MARCH 1, 2016. 

Canadian Business Health Management Inc. has been providing quality health and safety training to thousands of participants since 1997.

CBHM is a recognized provider by the Ministry of Labour (MOL) for Part One Basic Certification training and Part Two Certification (Workplace Specific Hazards Training) which focuses on a variety of topics including health and safety law, Rights Duties and Responsibilities of Workplace Parties, RACE (Hazard Recognition, Assessment, Control, Controls Evaluation) and investigation techniques.

The Part One Basic Certification (Joint Health and Safety Certification) course is taught by seasoned experts who have extensive industry and managerial experiences from a variety of industry sectors. Participants receive all of the mandatory requirements for certification and come away with the knowledge and skill sets to successfully handle their new responsibilities.

Program Topics:

  • Occupational Health and Safety Law
  • Rights, Duties and Responsibilities of the Workplace Parties
  • Hazard Recognition, Assessment and Control; Evaluation of Hazard Controls
  • Joint Health and Safety Committees
  • Duties and Responsibilities of JHSC Members and Certified Members
  • Health and Safety Resources
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date will incur costs.

Photo identification required at course registration per attending participant.


August 20 - August 21

- Part Two Certification Training, Barrie (August 20-21)

Part Two Certification Training (Workplace Specific Hazards), Barrie (August 20-21). MOL New Standards. Recognized Provider by the Ministry of Labour. Class size capped at 20 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Register for your Part Two Certification Now. Part Two must be completed within six months of Part One completion. If more than six months have passed, participants must either take a JHSC Refresher course before taking Part Two OR apply to the MOL for an extension.

Type: Part Two Certification:
Time: 8:00 AM - 4:30 PM:
Cost: $ 399.00/person plus HST; includes all training materials:
Location:

The Creative Space
12 Dunlop St E.
Barrie, ON
L4M 1A3

Day 1 Modules

Part One Review (RACE) and The Provincial Hazard Priorities, Violence and Harassment, Housekeeping (slips, trips, falls), Manual Material Handling, Emergency Preparedness

Day 2 Modules*

Indoor Air Quality, Heat/Cold Stress, Noise, Flammables/Combustibles, Equipment/Machinery Hazards, Driving Hazards

*Day 2 Modules subject to change based on attending company requirements… (please contact our office for more information).

** Day 3 – please note, at this time CBHM has developed 20 specific hazard modules that reflect the requirements for many sectors. When contacting our office
to schedule your Part Two, please identify your workplace specific hazards in order for us to schedule your training dates accordingly.

Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.


August 24 - August 24

- Working at Heights Refresher Training, Barrie (August 24 – Morning Session)

Working at Heights Refresher Training, Barrie (August 24 – Morning Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 8:00 AM - 12:00 PM:
Cost: $99.00/person plus HST; includes all training materials:
Location:

The Creative Space
12 Dunlop St E.
Barrie, ON
L4M 1A3

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.


August 24 - August 24

- Working at Heights Refresher Training, Barrie (August 24 – Afternoon Session)

Working at Heights Refresher Training, Barrie (August 24 – Afternoon Session). Recognized and Approved Provider by the Ministry of Labour. Class size capped at 12 participants. Payment required upon registration; no walk-ins accepted.

More Information Learn More

Refresher Training Required Every Three Years
Training validity is three years* from the date of successful completion; thereafter, refresher training must be taken by a worker on a construction project using one of the listed fall protection methods. Workers will be able to renew the validity of the working at heights training by successfully completing a CPO-approved half-day “refresher” training program, delivered by a CPO approved training provider.

Type: Working at Heights Refresher:
Time: 1:00 PM - 5:00 PM:
Cost: $130.00/person plus HST; includes all training materials:
Location:

The Creative Space
12 Dunlop St E.
Barrie, ON
L4M 1A3

Here are some additional guidelines about how to validate learner eligibility.

 

The Working at Heights (WAH) Program Standard, Section 11.2 states: Learners must have previously successfully completed both modules of an approved Working at Heights training program to be eligible for refresher training. Training providers can confirm learner eligibility in one of four ways:

 

  1. viewing the learner’s CPO-issued proof of completion card
  2. viewing the proof of completion card issued by the approved training provider
  3. matching the learner to a record of training in the training provider’s database
  4. viewing any record of training from the employer that meets the requirements in O.Reg 297/13 section 10 (must include the name of the worker, the name of the of CPO-approved training provider, the name of approved training program and the date of successful completion of training)
Please Note:

Program subject to change based on bookings. Non-attendance without written notification received prior to five days before course start date, will incur costs.

Photo identification required at course registration per attending participant.

 

A Ministry of Labour (MOL) learner ID alone is not sufficient proof of successful training completion for training providers to validate eligibility for refresher training.

 

If none of the above options are available, please have the learner contact the MOL to obtain a record of training. Training providers should not train learners who cannot show proof of eligibility. Training providers who choose to train learners without first obtaining proof of previous training should advise learners that if the MOL does not have proof of their WAH training, they are not eligible for refresher training and they will not receive a record of refresher training from the MOL.

The Ministry of Labour (MOL) will make every effort to ensure that training records are correctly matched but will not issue a new CPO card (proof-of-training completion document) to a learner who has not completed WAH training previously or whose previous record of training cannot be validated.

 

Please note – employers are responsible for ensuring all workers are competent in their duties; hence, many companies will/should continue to train their workers yearly on their policies and procedures specific to their equipment and safe work plan, and/or should whenever new equipment and/or changing conditions develop.
For additional information, please visit the MOL website by cliking here.